Home — Products — Stability Cabinets — Humidity Stabilty Chamber — NSRI492WSG/0H Humidity Stability Chamber

A large, glass-fronted stability chamber with multiple metal shelves and a digital control panel on top, used for scientific storage and environmental testing.

49 Cu. Ft. Temperature & Humidity Glass Door Stability Chamber

Product Model : NSRI492WSG/0H

Gray ETL Listed certification mark with C on the left and US on the right, indicating compliance with North American safety standards. Intertek is written below the mark.

Add to Quote View Quote Requests

Description Specifications Resources

PRODUCT OVERVIEW

Product Description

Ensure the quality and durability of your products with Corepoint® Scientific Humidity Stability Chambers.
These chambers provide a controlled temperature environment to deliver superior product testing that meets ICH Q1A standards. Improve product quality, test packaging, increase shelf life, and enhance safety with these chambers. With natural refrigerants and ultrasonic humidification, these units feature some of the most advanced technology in the industry.

Specifications

: Storage Capacity

49 Cu. Ft.

Door

Two glass right and left hinged, self closing, magnetic door gasket for positive seal

Shelves

Six stainless steel, sliding tray shelves

Mobility and Leveling

Four swivel casters (3 1/2”), front casters locking

Interior Lighting

Shielded, switched interior LED lighting

External Probe Access

Probe access port (3/4")

Insulation

High density urethane foam cabinet and door insulation

Exterior Material

Powder coat steel

Access Control

Keyed door lock

Warranty

18 months parts and labor warranty, 5 year compressor warranty

Product Weight (lbs.)

514

Rated Amperage

12 Amps

Power Plug/Cord

NEMA 5-15P conforms to UL471 requirements

Electrical Requirement

115V, 60 Hz
: Compressor

Top mounted, variable speed compressor

Refrigerant

HFC-free refrigerant (R600a)

Air Flow

Plenum air distribution
: Uniformity (Cabinet air)

+/- 1°C from 4°C to 60°C

Stability (Cabinet air)

+/- 0.5°C maximum from 4°C to 60°C

Humidity Set Point Range

10% to 95% RH

Humidity Control

+/- 0.1%RH

Humidity Stability

+/- 3% RH
: Controller technology

Proportional Integral Derivative (PID) microprocessor with LCD display, °C/°F switchable

Display

LCD display

Battery Backup

Controller

Digital Communication

RS-485 (MODBUS)

Access

USB port for data transfer and software updates

Temperature setpoint range

4°C to 60°C

External alarm connection

State switching remote alarm contacts

Alarms

Visual alarm indicator, audible alarm indicator, process phase specific temp alarm, process phase specific humidity alarm, power failure alarm, sensor failure alarm
: Exterior Width (in.)

54

Exterior Depth (in.)

36.375

Exterior Height (in.)

81.500

Interior Width (in.)

49.125

Interior Depth (in.)

25.500

Interior Height (in.)

52.75

Disclaimer

10-60 PSI demineralized water supply required and floor drain access. Specifications are subject to change, for optimal uniformity at set points above 50°C, settings adjustments may be required based on load conditions and chamber configuration.

Resources

Product Data Sheet

Manuals

Literature

49 Cu. Ft. Temperature & Humidity Glass Door Stability Chamber

Product Description

Specifications

Resources

Freezers (49)

Refrigerator / Freezer Combos (29)

Refrigerators (80)

Stability Cabinets (29)

Product Markets

Cubic Footage

Temperature Setpoint

Door Type

Door Count

Freezer Defrost

Environmentally Friendly

ADA Compliant

Stainless Steel